Akuvox Site Programmig Form

Akuvox Site Programmig Form main image Akuvox Site Programmig Form image
Akuvox Site Programming Form | LTS Security Australia

Akuvox site programming form

Everything we need to pre-program your Akuvox intercom and access control system before it leaves our warehouse. Fill in what you know, skip what you don't, then print it or save it as a PDF and email it to your LTS contact.

Takes about10 minProgress saves in this browser
1

Your details

Who we should contact with questions about this job.

Pre-programming service
2

Site

The site name appears in the SmartPlus app and installer portal. The address sets the time and weather on indoor monitors.

Type of site*
Cloud or standalone*
3

Buildings and units

How the site is split up, so lobby panels show the right directory and call the right apartment.

Buildings*
#Building nameFloorsUnit numbers
What should the lobby panel directory show?
How will residents answer calls?
Units without an indoor monitor need an ongoing SmartPlus subscription.
4

Door stations and monitors

Use the names you want people to see in the app and on the monitor screens, such as "Front Gate" or "Reception Door". Leave model or IP blank if you don't know them. For an access control only site, mark this as not applicable.

Door stations*
#NameLocationModelStatic IP

Indoor monitors

#NameRoom or unitModelStatic IP

For apartments with one monitor per unit, you can just list one row such as "Unit monitors, all units, C315" and include the details in the resident spreadsheet.

Do you want CCTV cameras viewable on the monitors or app?
5

Doors and access control

List every door, gate or lock the system will release, including ones opened by a door station relay. If there's nothing to set up here, mark it as not applicable.

Both door stations and access control are marked not applicable, so there's nothing for us to program. Check this is right.

#Door nameOpened by (device)Lock typeUnlock (sec)Exit buttonExit readerDoor sensor

Exit button: a request-to-exit button on the inside. Exit reader: staff badge or scan to get out (records who left). Door sensor: alerts when a door is forced or held open.

How people get in

Entry methods to enable
Lift control
6

Users and schedules

The main account holder receives the SmartPlus invitation and can add or remove other users.

Family members

Each person gets their own SmartPlus login. Don't share the master account.

#NameEmailMobile

Access schedules

When each group can get in. Untick a day to block access that day.

DayAdmin usersEmployees
On public holidays
7

Calls

What happens when a visitor presses call.

Ring
8

Network

If the site's IT provider manages the network, they can fill this in. Cloud sites need a working internet connection.

IP addressing*
Internet available at installation?
9

Device password

The installer password we set on every device's web interface. Use 8 to 32 letters and numbers, with at least one uppercase letter, one lowercase letter and one number.

For your security, the password isn't saved in this browser. It's only included in the PDF, so send the PDF directly to your LTS contact.

10

Anything else

Special requirements or extra files you'll send. If there's nothing to add, tick the box to finish.

I'll also email

LTS Security Australia, Peakhurst NSW. ltsecurityinc.com.au (opens in a new tab)

0 of 0 sections complete