LTS 48V DC-Jack Power Supply for 4-Channel IP NVR (DVCPA1AA)

LTS 48V DC-Jack Power Supply for 4-Channel IP NVR (DVCPA1AA)

This is the genuine LTS replacement power adapter built specifically for 4-channel IP network video recorders that use a round DC-jack power input. It converts standard Australian 240V AC mains power into the clean, stable 48V DC output that LTS 4-channel NVRs and their built-in PoE ports need to run reliably. Whether you're replacing a faulty original adapter, repairing a damaged power cable, or simply want a spare on hand, this unit is a straightforward plug-and-play match for compatible LTS recorders.

Key Features

• Purpose-matched output: Delivers 48V DC output at 1.36A, sized to the power draw of a 4-channel PoE NVR.
• AU-ready input: Accepts standard AC 240V mains power, no voltage converter required.
• Direct DC-jack fit: Uses the same round barrel-style DC connector as the original NVR power port, so no soldering or adapting is needed.
• Compact external design: Small, lightweight plug-pack style enclosure that sits neatly behind or beside the recorder.
• Genuine LTS part: Sourced as an authentic LTS spare/replacement, not a generic third-party clone.
• Simple swap-in installation: Unplug the old adapter, plug this one in - no NVR configuration changes required.
• Good stock item for installers: Handy to keep as a spare part for service calls and maintenance kits.

Where This Power Supply Is Used

This adapter is intended for LTS 4-channel IP NVRs that draw power through a DC-jack input, including a number of models in the LTS Platinum and PRO-X recorder ranges. LTS 4-channel professional NVRs commonly specify a power supply rated around 48 V DC at roughly 1.35 A, which lines up closely with this adapter's 48V @ 1.36A output. It is a good fit for CCTV installers and system integrators who need a reliable replacement supply for an existing LTS 4-channel recorder, or for end users whose original adapter has failed or gone missing.

What's in the Box

• 1 x LTS 48V DC power adapter (DVCPA1AA)
• Integrated mains cable / AU-compatible plug
• DC barrel-jack output connector for direct NVR connection

Frequently Asked Questions

Q: Will this power supply work with any 4-channel NVR?
A: It is designed to match LTS 4-channel IP NVRs that use a DC-jack power input rated at 48V. Always check your recorder's original power label before substituting a different adapter.

Q: Can I use this adapter to power a camera directly?
A: No. This style of power supply is intended for the NVR itself, not for powering cameras directly. Cameras connected via the NVR's PoE ports are powered through the recorder, not the adapter's output jack alone.

Q: What's the difference between this (DVCPA1AA) and the DVCPA5AA adapter?
A: The DVCPA5AA is a 4-pin adapter rated at 12V 5A for Platinum 4, 8, and 16-channel DVRs/NVRs, whereas the DVCPA1AA covered here is the 48V 1.36A DC-jack version used on 4-channel IP NVRs - they are not interchangeable.