LTS HDMI Cable - 5 Metres (Male to Male)
Keep your surveillance monitor, NVR, or DVR connected with this LTS 5 metre HDMI cable, purpose-built for security installations where the recorder and display are not sitting side by side. Terminated with standard HDMI male connectors at both ends, this lead carries digital video (and audio, where supported by the connected devices) from an NVR, DVR, or media source straight to a monitor or TV without the quality loss associated with older analogue connections.
Key Features
- 5 metre length - suitable for equipment racks, wall-mounted monitors, or NVRs positioned away from the display.
- HDMI male to HDMI male connectors for direct, tool-free connection to any standard HDMI input or output.
- Digital transmission of video signal, reducing the interference and signal degradation common with long analogue cable runs.
- Compatible with LTS Platinum and PRO-X NVRs, DVRs, and HD monitors, as well as most third-party HDMI-equipped displays and sources.
- Simple plug-and-play installation with no configuration or driver software required.
- Durable outer jacket designed to withstand routine handling during installation and maintenance.
- A practical, low-cost accessory to complete a new CCTV system install or replace a damaged or undersized cable.
Recommended Use & Important Installation Note
This cable is ideal for connecting an NVR or DVR to a nearby monitor in a control room, reception desk, or back-of-house office where a 5 metre run is required. Because HDMI is not designed as a long-distance transmission standard, cable runs of 5 metres or more can place additional resistive load on the HDMI output circuit of some recorders, which may degrade the connection over time. For runs at this length, LTS recommends fitting a powered HDMI booster or extender near the NVR to relieve strain on the unit's HDMI port and help maintain a stable, long-term connection. For longer distances or where a booster is preferred, pair this cable with an LTS HDMI extender/splitter such as the HDMI-T002N2 or HDMI-T004N2.
What's in the Box
- 1 x LTS HDMI Cable, 5 Metres, Male to Male
Frequently Asked Questions
Will this cable work with any brand of NVR or monitor?
Yes. It uses a standard HDMI male connector, so it will work with any device that has a compatible HDMI port, including LTS Platinum and PRO-X recorders as well as most other manufacturers' equipment.
Do I need a booster for a 5 metre HDMI run?
Not always, but LTS recommends using a powered HDMI booster at the NVR side for longer runs to reduce load on the recorder's HDMI circuit and support reliable performance over time.
Does this cable support 4K video?
It is designed for standard HD video output from NVRs and DVRs; for higher-resolution 4K sources over longer distances, an HDMI extender is recommended instead of a passive cable.
Additional Resources
(CABLE5mHDMI)
| SKU | CABLE5mHDMI |
| Brand | LTS - Platinum |
| Shipping Weight | 0.2500kg |
| Shipping Width | 0.220m |
| Shipping Height | 0.050m |
| Shipping Length | 0.190m |
| Shipping Cubic | 0.002090000m3 |
Be The First To Review This Product!
Help other LTS Security Australia users shop smarter by writing reviews for products you have purchased.
We Also Recommend
LTS 10 Metre HDMI 2.0 Cable - HDMI to HDMI Male fo
SKU: CABLE10mHDMI
LTS HDMI 1x2 Video Distributor with 4K, 1080p & 3D
SKU: HDMI-S002
LTS 2-Port HDMI Switcher (2 IN / 1 OUT) with Remot
SKU: HDMI-T002N2
More From This Category
CCTV Warning Sign (4x Mounting Eyelets)
SKU: WARNINGSIGNCCTV
Ethernet Extender over Coax Cable (Passive)
SKU: VT-EoC002
LTS 6-in-1 OTDR CCTV Tester with 5.4" Touchscreen
SKU: LMO5-ITCAA-O
LTS 7-Inch All-in-One CCTV Tester with Digital Mul
SKU: LMX7-ITCAA-MP