LTS 10 Metre HDMI 2.0 Cable - HDMI to HDMI Male for CCTV & NVR

LTS 10 Metre HDMI 2.0 Cable

This LTS 10 metre HDMI cable is purpose-built for security installations where the NVR, DVR, or media source sits a long distance from the display. Featuring HDMI 2.0 performance with standard HDMI Male to HDMI Male connectors on both ends, it is a straightforward, plug-and-play way to extend a high-definition video and audio signal across a plant room, office, or control room without the complexity of a networked extender kit.

Key Features

• HDMI 2.0 specification supporting high-definition video and audio over a single run
• 10 metre length for reaching displays mounted well away from the recorder or source device
• HDMI Male to HDMI Male connectors compatible with standard HDMI ports on NVRs, DVRs, monitors, and TVs
• Shielded cable construction to help maintain signal integrity over the longer run
• Simple, tool-free plug-and-play installation
• Suits both CCTV recorder-to-monitor connections and general AV setups
• Compatible with LTS Platinum NVRs, DVRs, and most third-party HDMI-equipped equipment
• Space-saving alternative to running separate video extenders for shorter cable runs

Recommended Use & Important Installation Note

This cable is ideal for connecting an NVR or DVR to a monitor or TV in a security control room, warehouse office, or retail back-of-house area where the display cannot be positioned close to the recorder. Because HDMI is not designed as a long-distance signal standard, running a passive 10 metre cable directly from an NVR or DVR's HDMI output can place additional resistive load on that device's HDMI circuit, and sustained use may degrade the port over time. For runs of this length, LTS recommends fitting a powered HDMI booster or extender at the recorder end to take the load off the unit and help preserve long-term signal reliability. For distances beyond what a passive cable can reliably support, consider an LTS HDMI-over-Cat5e/6 extender kit instead.

What's in the Box

• 1 x LTS 10 Metre HDMI 2.0 Cable (HDMI Male to HDMI Male)

Frequently Asked Questions

Does this cable support 4K resolution?
It is built to the HDMI 2.0 specification, which is designed for high-definition video and audio; actual supported resolution and refresh rate will also depend on the source and display device's own HDMI capabilities.

Do I need a booster with this cable?
At 10 metres, LTS recommends using a powered HDMI booster at the NVR or DVR end to reduce load on the recorder's HDMI output and help prevent long-term damage to the port.

Will this work with any brand of NVR, DVR, or monitor?
Yes, it uses standard HDMI Male connectors on both ends, so it is compatible with LTS Platinum recorders as well as most other HDMI-equipped monitors, TVs, and source devices.

Additional Resources

• HDMI-T002N2
• HDMI-T004N2