LTS IP Intercom 1-to-1 Pre-Programming Configuration Service

LTS IP Intercom Pre-Programming Service (1-to-1 Configuration)

The LTS Intercom Pre-Programming service is a configuration add-on for LTS IP Intercom Kits, designed to save installers time on site. Instead of manually linking a door station and indoor monitor through IP address setup, master station binding, and network configuration menus, LTS Security Australia pre-configures the pairing before the units leave the warehouse. When the door station and indoor monitor arrive, they are already matched as a working 1-to-1 pair, ready to power up and use with minimal on-site setup.

Key Features

• 1-to-1 pairing: One IP door station is linked directly to one indoor monitor before dispatch.
• Reduced install time: Skips manual network configuration steps such as setting the door station's Master Address and Linked Network Configuration.
• Pre-set IP addressing: Devices are configured within a compatible IP range so they can communicate as soon as they're connected to the same network or directly via cable.
• Fewer configuration errors: Removes the risk of mismatched IP settings, incorrect device names, or failed device linking during installation.
• Compatible with standard LTS IP Intercom Kits: Works with LTS door station and indoor monitor combinations sold under the LTS IP Intercom Kits range.
• Supports PoE deployment: Pre-programmed units still support standard Power over Ethernet or 12V DC power on the indoor monitor, per standard LTS intercom specifications.
• Ideal for single-dwelling setups: Best suited to standalone installations with one door station and one indoor monitor, such as a house, office entry, or single-tenancy unit.
• Backed by LTS support: Configuration performed by LTS Security Australia technicians familiar with LTS intercom firmware and network settings.

Why Choose Pre-Programming

This service is most valuable for installers and integrators who want a faster, more predictable rollout on straightforward residential or small commercial jobs. Rather than spending time on-site logging into the door station's web interface, setting IP addresses, and manually linking the indoor monitor, the installer can mount both devices, connect power and network cabling, and expect the intercom to ring and display video without further setup. This is particularly useful for trades who install several single-door intercom systems and want consistent, repeatable results across jobs.

What's Included

• Pre-configured 1-to-1 pairing between one LTS IP door station and one LTS IP indoor monitor
• Pre-set network/IP configuration to enable device communication out of the box
• Basic device linking so the indoor monitor rings and displays video from the paired door station

Frequently Asked Questions

Does this service include the hardware?
No, this is a configuration service applied to a compatible LTS IP door station and indoor monitor purchased separately or as part of an LTS IP Intercom Kit.

Will I still need to do any setup on site?
Minimal setup is required. Devices arrive pre-linked, though final network integration (such as connecting to your local router or the LTS Connect app) may still be needed.

Can this be used for multi-unit apartment systems?
This 1-to-1 service is designed for single door station/single indoor monitor setups. Larger multi-tenant configurations typically require project-specific programming.